Cobalt-digital COMPASS 9035 Analog and SDI Input to SDI Output Co Manuel d'utilisateur télécharger pdf (Page 83)

9035-OM (V4.4) 9035 PRODUCT MANUAL 3-39

Operating Instructions 9035 Function Submenu List and Descriptions

Tone Generator

This function sets the test tone frequency for each of four

tone generators (Tone Generator 1 thru 4).

• Frequency Selection Lists Selects the frequency for each of the four tone generators. 18 discrete

sine wave frequencies are available, ranging from 50 Hz to 16 kHz

(default frequency is 1.0 kHz).

Note: Unity-gain signal level is equivalent to -20 dBu.

Audio Mixing

This function provides down-mix audio routing selections

that multiplexes any five embedded audio channel or AES

channel sources into a stereo pair (Down Mix Left and Down

Mix Right)

• Down Mixer Selection

Separate drop-down lists for Left, Right, Center, Left Surround (Ls),

and Right Surround (Rs) inputs allow embedded, AES, or analog

channel audio source selection for each of the five inputs as shown below.

The example below shows selection from various sources and the

resulting stereo pair DM-L and DM-R. The two signals comprising the pair

can be routed and processed the same as any other audio input source.

Note: The stereo pair consists of basic L/R PCM signals with no

additional encoded information.

Table 3-2 9035 Function Submenu List — continued

•

DM-L

DM-R

Embedded Ch 1

Embedded Ch 2

AES Ch 6

Embedded Ch 4

Embedded Ch 5

AES Ch 1 - Ch 16

AN-AUD Ch 1- Ch 8

Embed Ch 1 - Ch 16

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 105 106

Pas de commentaire

Cobalt-digital COMPASS 9035 Analog and SDI Input to SDI Output Co Manuel d'utilisateur Page 83