Cobalt-digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converte Manuel d'utilisateur télécharger pdf (Page 101)

9901-UDX-OM (V1.15) 9901-UDX PRODUCT MANUAL 3-47

Operating Instructions 9901-UDX Function Submenu List and Descriptions

(continued)

• Loudness-Processed Channels as

Source for AES Channel Output

LP51 L thru LP51 Rs (5.1-channel loudness processor processed

channels L thru Rs) range in Source drop-down list routes a

loudness-processed channel to be the source for the selected AES output

channel.

(In this example, loudness-processed channel LP51 L is the source for

destination AES output Ch 1)

Note: Where stereo loudness processor is available, drop-down

selections for these channels are LP2 L and LP2 R.

• Tone as Source for AES Channel

Output

Tone 50 Hz thru Tone 16 kHz range in Source drop-down list routes one

of eight tone frequencies to be the source for the selected embedded

output channel.

(In this example, 50 Hz tone is the source for destination AES output

Ch 1)

• Dolby

Encoder Output as Source for

AES Channel Output

Encoded Dolby (L) and Encoded Dolby (R) selection in Source

drop-down list routes a Dolby encoded pair from any of the card’s Dolby

encoders (A up to D) to be the source for the selected AES output

channel.

(In this example, Dolby Digital Encoder B (L) is the source for destination

AES output Ch 1)

Note: Encoded channel pairs selected should only be applied to

companion intact pairs (e.g., signals can be applied to AES pair

1/2, or AES pair 3/4 and so on, but not split to route through

fabricated unrelated pairs such as AES ch 2/ch 3).

• Silence as Source for AES Channel

Output

Silence selection in Source drop-down list mutes the selected AES output

channel. Use this setting for any unused AES output channels.

(In this example, Silence is the source for destination Embedded output

Ch 1)

Note: If an AES pair is being used as an input, the channels do not have

be muted here.

• Gain / Mute Control Provides relative gain (in dB) control and peak level display for

corresponding AES output channel.

Also provides a channel Mute checkbox.

(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)

Table 3-2 9901-UDX Function Submenu List — continued

•

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 127 128

Commentaires sur ces manuels

Pas de commentaire

Cobalt-digital FUSION 3G 9901-UDX 3G_HD_SD Up Down_Cross Converte Manuel d'utilisateur Page 101

Commentaires sur ces manuels