Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur télécharger pdf (Page 24)

24 9223-OM (V2.0)

o Auto Detected: The encoder will auto-detect the input signal, and automatically

configure for it if it is a supported signal. The Input Resolution, Input Source,

and Field/Frame Rate controls are not displayed.

The following table lists the supported input video signals:

Composite Signals SDI Signals

NTSC

NTSC 4.43

PAL B/D/G/H/I/N

PAL-M

PAL-Nc

SECAM

720×480i59.94

720×576i50

1280×720p50

1280×720p59.94

1280×720p60

1920×1080p23.98

1920×1080p24

1920×1080i50

1920×1080i59.94

1920×1080i60

1920×1080p50

1920×1080p59.94

1920×1080p60

If Video Input Settings is set to Manual Selection, the Input Resolution, Input Source and

Field/Frame Rate parameters are displayed and must be set to match the incoming video signal.

• Input Resolution: Select the resolution of the input video signal. The following four

choices are available:

o SD: 720×480i (this will be presented as 720×576i if Field/Frame Rate is set to

PAL).

o HD: 1280×720p

o HD: 1920×1080i

o HD: 1920×1080p

• Input Source: Select the input source type. This control is available only if the Input

Resolution is set to SD. In this case, the options will be Composite or SD-SDI. If

Input Resolution is set to any of the HD values, this control will not be selectable, and

will show the appropriate type of input (HD-SDI for 1280×720p and 1920×1080i, and

3G-SDI for 1920×1080p).

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 99 100

Pas de commentaire

Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur Page 24