Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur Page 61

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 100
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 60
61 9223-OM (V2.0)
Video Buffer %, Audio Buffer %: The encoder has separate buffers for audio and
video. These buffers are used to temporarily store the bitstream if there is no enough
network and/or server bandwidth. However, if this situation persists, the buffers start to
fill up. These indicators report the current state of the buffers. If they overflow, data is
dropped. Ideally, these buffers should stay empty (close to 0%).
Dropped Packets: If the buffers overflow, data is dropped. The encoder will drop entire
access units (an audio block or a video frame). This indicator has a count of the number
of access units dropped for the current connection. This count resets when a new
connection is established.
ASI Outputs Tab
The 9223 card has two ASI output ports that can be independently configured. Use this tab to
configure and manage the ASI output ports.
ASI Ports: Configuration Tab
The default appearance of the Configuration tab is:
The ASI Outputs table contains the current configuration of the ports, as follows:
Status: Indicates the port status. It can contain the following values:
o OK: Port is operating normally.
o Unlocked: Port is unlocked. This means that the port is in Automatic Bit Rate
mode and it has no input.
o Overflow: Transmit overflow. This means that the ASI Output is in Manual
mode, and the configured bit rate is insufficient to carry the bitstreams connected
to it. This situation will raise an alarm as packets are being dropped.
Size: Indicates the configured transport packet size, in bytes.
TS Bit Rate (b/s): This reports the actual transport stream bit rate, in bits/second.
Port Name: This reports the user-configured Port Name.
Edit Button: Clicking on this button allows configuration of the port. The ASI Output
Configuration screen appears, with the settings for the selected port.
Vue de la page 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 99 100

Commentaires sur ces manuels

Pas de commentaire