Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur télécharger pdf (Page 92)

92 9223-OM (V2.0)

o Error: These are events that affect the operation of the device. For example, an

ASI Input loosing lock or an IP Input no longer receiving packets. An error will

impact service until addressed.

o Warning: These are events that may produce visible glitches, but they do not

have a continuous service impact. Examples of warnings are automatic

redundancy switches and ARP renewal failures.

o Info: These are informational events. All configuration actions are logged with

this severity. When an error is cleared (for example, an ASI Input regains lock),

the event is logged with this severity as well.

• Subsystem: The subsystem affected by the event. This may be a port, a stream, or the

card itself.

• Event: This is a textual description of the event.

The 9223 does not have a battery-backed real-time clock. It depends on the frame controller to

obtain the current date and time, and the frame controller depends on an external Network Time

Protocol (NTP) server to obtain current date and time. By default, the 9223 will initialize its

internal time-of-day clock to January 1, 2010, GMT. If the frame controller is NTP-

synchronized, the 9223 will then accept time from it and set its time-of-day clock accordingly.

In order to configure the frame controller for NTP, open its configuration screen on

Dashboard™, select the Network Tab, and enter the IP address of an available NTP server:

Select This

Configure

If your frame controller has access to the Internet, you can point it to one of the public NTP

servers for your region. You can find more details on this link:

http://psp2.ntp.org/bin/view/Servers/WebHome

The full Admin Event Log tab is displayed below:

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 98 99 100

Pas de commentaire

Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur Page 92