Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur télécharger pdf (Page 66)

66 9223-OM (V2.0)

Connections section, later in this document.

IP Output

Parameters

Input Selection

Connection

Parameters

The Basic View configuration parameters are as follows:

• Enabled: This allows the output stream to be enabled or disabled. If it is disabled, no

packet transmission takes place. This feature is provided for testing purposes (i.e.,

temporarily disable an output for fault-finding). Most users will leave the stream

enabled.

• UDP Port: selects the UDP port to transmit to. Valid values are between 1 and 65535.

Note that, in traditional IP networks, UDP ports between 1 and 1023 are reserved for

administrative uses. It is recommended to use UDP ports 1024 and higher. The 9223,

however, will accept any legal value. Note that if the port is configured for RTP (see the

Advanced View discussion later in this section), the UDP port must be an even number,

and the 9223 user interface will enforce this restriction – odd numbers will be

automatically rounded up.

• Destination Address: selects the IP address to transmit to. Any unicast or multicast

address can be entered here, with the exception of the loopback range (127.0.0.0 to

127.255.255.255). The 9223 will also accept the broadcast IP address of

255.255.255.255, and will transmit the packets as Ethernet broadcasts. Use of

broadcasts, however, is strongly discouraged.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 99 100

Pas de commentaire

Cobalt-digital COMPASS 9223 Dual-Channel 3G_HD_SD MPEG-4 Encoder Manuel d'utilisateur Page 66